A Common Hard Drive Problem

Hard disk drives are a very popular and important form on data storage medium for the computers. They are compact and can support large volumes of information. But with the complexity of its design, it is usually pretty difficult for a layman to predict what exactly a hard drive problem is when it occurs. They end up doing more damage to it than good because of their dabbling in things quite out of their area of expertise.

One such hard drive problem occurs when one starts hearing scarping sounds even though the hard disk seems to be powering up just fine. If such a situation occurs, it is highly recommended that you immediately stop using that hard drive to avoid any further damage. These types of sounds are caused by loose read/write heads, which affects the disk platter and causes damage to the magnetic storage medium. It is possible to solve this hard drive problem if you try and replace the broken read/write arm with a working one. Special care must be taken when trying to clean off the broken fragments on the disk platter as you may cause scratches, which may lead to further data loss. It is recommended that you save your hard drive in a cool and dry place and seek technical assistance to improve your chances of data recovery and avoid hard drive problems in the future.

Data recovery from damaged hard drives might seem a very daunting and ominous task to anyone who has not had some previous encounters which these sorts of hard drive issues. But most of the times the problem is not as complicated as it may seem and you can save yourself quite some time and hassle if you can properly diagnose the problem and perform the steps necessary to save your data. One such hard drive problem is that although the hard disk powers up, it does not mount and no distinct sound of the read/write arm is audible. This usually occurs because of the overheating of the hard drive, which causes the metal components to expand and stick to one another. This will cause deletion of files and folders and you may be prompted to format your hard drive.

In order to remedy this hard drive problem, first detach the hard disk drive from your computer and allow it cool to room temperature. Then by using a vacuum pump remove all air from an antistatic container and place the hard disk in it. It is very important that the container be antistatic as sparks may cause further data loss and damage to the ICs. After placing the disk in the container, place the container in a refrigeration unit and allow it to cool for 30 minutes. After taking it out of the refrigerator, allow it to settle for 5-10 minutes before attempting data recovery. You should have an alternate data storage unit on hand to store the recovered data.

Hard drives problems are tough to analyze, especially when you’re talking laptops. A few problems occur because of software program issues or perhaps several occur because of physical hard disk breakdowns. A few identification symptoms related with hard disk issues will reviewed in this article.

The first issue to look at is a slow OS. This might be due to lots of things. That means there is definitely something mechanically incorrect. Mechanical problems, in many cases in point cannot be recovered unless you have access to proper laptop data recovery facilities. The hard drive should be changed immediately, no matter the laptop brand. Your next critical issue is a blue screen error. Blue screen errors are the error message shown in white lettering on a blue background. It happens when a Microsoft operating system has troubles managing an activity. The code 0x0000000E, or “UNMOUNTABLE_BOOT_VOLUME”” message indicates a serious hard drive problem. Another issue is computer freezing. A bad sector is a corrupted part of the existing hard disk that may lockup your notebook computer when trying to access it. An effective approach to deal with this specifically is to run chkdsk from the command prompt. When sufficient bad blocks are found, then a substitute disk drive will be important. Last issue may be ‘Fixed Disk not found’. These kinds of problems occur if the hard drive is just not found. This is the most classic trigger.

Common Hard Disk Errors To Watch For

While operating their computer, people often see error messages like ‘Data error reading drive’, ‘Hard disk drive failure’, ‘I/O error’, ‘Disk not found’ etc. These messages are shown when the OS cannot locate the boot device or booting code. Consequently, the computer hangs and shows a blue or black screen. The main reason is a structural hard drive problem. Most likely, the hard drive is not well attached to the pc or laptop or maybe there is a damage to the hard drive. Hard drive problems can also be caused by computer malware, cyclical redundancy defects or bad sectors.

In order to resolve your hard drive problem, the connection should be checked out first. If no problem is found, then it is the cause of defective or damaged hard drive. Get in touch with the provider or manufacturer to repair or solve the hard drive problem. Sometimes the hard disk can be crashed, or all the stored data seems gone. It might be a serious problem for the user. Firstly, the damaged hard drive should be repaired. There are several companies that offer standard laptop data recovery.

One comment on “A Common Hard Drive Problem

  1. Lesa Lofman on said:

    There is a scraping sound coming from my hard drive. I think it signifies that my hard drive is about to get crashed. I am afraid to reboot it because I have experienced this before and when I turned the computer on nothing appeared on the monitor.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>